Industrial Type Wastage Incinerator
Industrial Type Incinerator General Specification
i.System Capacity: 100KG/h
ii.Type of Waste: Municipal Waste (Paper, Plastic, Wood etc.)
iii.Waste Feeding: Manual
iv.Fuel: Natural Gas
v.Incinerator Type: Double Chamber
vi.Expernal Cladding: MS Sheet of suitable Gauge, Painted with corrosion resistant paint
vii.Flue Gas Emission Discharged to the Atmosphere should meet Pakistan National Environment Quality Standards (NEQS)
viii.User Friendly operation should be ensured by proper automation
ix.Adequate Safety Features should be incorporated to protect the premises and operators against mishaps and accidents
Primary Chamber
i.Auto ON/OFF Burner
ii.Auto Temperature Control
iii.Excess Air Blower Fan
iv.Chamber constructed of two layer refractory linging
v.Compressing: Thermal insulator linging and refractory masonry linging sufficient enough to maintain normal temperature at outside
Secondary Chamber
Primary Chamber
i.Auto ON/OFF Burner
ii.Auto Temperature Control
iii.Excess Air Blower Fan
iv.The Chamber constructed of two layer refractory linging, comprising
v.Thermal insulator linging and refractory masonry linging sufficient enough to maintain normal temperature at outside
Control Panel
Standard PLC Control Panel
Note: All instruments/controller must be of high quality, preferably European/Japanese Origin
Chimnery/Stack
Made of MS Sheet, Sufficiently insulated and Lined with Refractory bricks (where required) to maintain normal temperature at outer surface
Painted with High Quality
Customer will be responsible for provision of electric supply and natural gas upto incinerator
Heat and Corrosion Resistant Paint
NOTE:
Motors of all blowers/fans/pumps must be of high quality, preferably European/Japanese Origin
